CYP IP-A750TX handleiding
Handleiding
Je bekijkt pagina 18 van 32
13
Audio Select: Select between the optical, line or mic inputs on the
transmitter.
Audio Mute: Enable or disable muting the audio output.
Mic Input Gain: Increase or decrease the audio gain of the
microphone input by dragging the slider.
Note: This is only controllable when Mic In is the selected source.
Front Panel Lock for Device Button and Knob: Enable or disable
either of these lock types for the front panel. When the locks are
enabled, the user can only change settings using the WebGUI or
Telnet commands.
2) Serial over IP: Set the desired baud rate, data bits, parity, and stop bit
for the RS-232 signal to extend.
Note: The transmitter and receiver must have the same serial settings.
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
Start your preferred Telnet/Console client, or use the built in client
provided by most modern computer operating systems. After starting
the client, connect by using the current IP address of the unit and port
23 (if the communication port number used by the unit has not been
changed previously). This will connect us to the unit we wish to control
and commands may now be entered directly.
Note 1: If the IP address of the unit is changed then the IP address required for
Telnet access will also change accordingly.
Note 2: This unit defaults to Auto IP mode. The current IP address can be
veried using the Device Discovery software. The default communication port
is 23.
Bekijk gratis de handleiding van CYP IP-A750TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-A750TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2131 MB |
