CYP IP-9000RX handleiding
Handleiding
Je bekijkt pagina 6 van 60
1
1. INTRODUCTION
The IP-9000RX 1G AV over IP decoder with full 4K HDR and Dolby Vision
support is the latest advancement in AV over IP technology. Supporting
both Unicast and Multicast modes, enabling AV signals distribution with
video wall modes and USB functionality in Multicast mode. It supports the
transmission of Ultra High-Denition signals (up to 4K@60Hz 4:4:4 plus 4K
HDR and Dolby Vision) with audio, IR, RS-232 and USB 2.0 up to 100m on a
single cable. The USB connectivity allows for the connection of USB ash
drives, webcams, keyboard, and mouse etc. The transmission distance can
be further extended (up to 100m per segment) by using gigabit network
switches, allowing the user to cascade the system without signal loss or
introducing delay.
When the extension system’s units are in multicast mode, a single
transmitter’s AV signal can be sent to a large number of receivers within
the same local network without the additional receivers causing any
bandwidth requirement increase. Additionally, that same multicast
signal can be used to create large multi-display video walls with amazing
simplicity. When combined with the optional IP Master Controller
(IP-CS9000) the functionality of the system expands exponentially.
Its centralised web-based interface greatly simplies control and
management of large, distributed video matrix or video wall systems
adding to their exibility in large residential or commercial installations.
This system also features bi-directional IR and RS-232 pass-through,
analogue line level in/out, and a microphone input (on the receiver),
providing the user with a variety of audio options. The USB functionality
allows the system to act like a remote USB hub which, when combined
with the HDMI input/output feature, provides a exible remote
platform for the seamless control of multiple PC systems. Conguration
information is provided via On Screen Display (OSD) and the decoder own
WebGUI plus using the IP-CS9000 IP Master Controller, and direct Telnet
commands.
The IP-9000RX is Dante Ready which can transmit Dante data upon
activation and is compatible with any standard Dante audio transmitters/
receivers that the audio might be routed to. Dante Ready provides a
exible way to enable and expand the connectivity and interoperability
of the world’s de-facto AV-over-IP solution, even after the initial purchase.
Upgrade your system with Dante and connect to over 4,000 products
from 500 manufacturers. Dante Ready is built within the widely used
Bekijk gratis de handleiding van CYP IP-9000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-9000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4713 MB |
