CYP IP-7050RX-TG handleiding
Handleiding
Je bekijkt pagina 32 van 48
27
COMMAND
Description and Parameters
48 [2160p@25Hz]
49 [2160p@30Hz]
Note: Downscaling is limited to 1/2 of the horizontal/vertical pixels of the
source. For example: 3840×2160 (4K) to 1920×1080 (1080p) is OK, but
3840×2160 (4K) to 1280×720 (720p) or 640×480 is not. When outputting
to a video wall, the resolution of the entire video wall together (rather
than each individual display) should be used for this calculation.
set_vw N1
Enable/disable video wall functionality.
Available values for N1:
0 [Disable]
1 [Enable]
get_vw
Show video wall functionality status.
set_vw_osd N1
Enable/disable video wall OSD to display the target receiver number
on the connected display.
Available value for N1:
0 [Disable]
1 [Enable]
get_vw_osd
Show the current video wall OSD state.
set_vw_layout N1 N2
Set the video wall’s total horizontal and vertical display count.
N1 = 1~16 [Horizontal display count]
N2 = 1~16 [Vertical display count]
Bekijk gratis de handleiding van CYP IP-7050RX-TG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7050RX-TG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3740 MB |
