CYP IP-7000TXWP handleiding
Handleiding
Je bekijkt pagina 9 van 52
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IR LINE
IN INOUTOUT
SOURCE
RS-232
HDMI IN
VGA IN
USB
LINK POWER
IP-7000TXWP
1 2 3 4 5 6
7 8 9 10 11
1
USB 2.0 (Type-B) Port: Connect directly to a PC, or other USB host
device, to extend its USB functionality to the ports on the connected
receiver.
2
RS-232 Port: Connect directly to your PC/laptop to send commands
to RS-232 devices connected to the linked receiver. The baud rate is
congurable, but the default baud rate is 115200.
Note: When the transmitter is in multicast mode every connected receiver
unit can send RS-232 commands to the transmitter and commands sent
from the transmitter side will be sent to all associated receivers.
3
SOURCE LED: This LED will illuminate red when an HDMI source is live
and green when a VGA source is live. If no live sources are detected,
this LED will remain o.
4
LINK LED: If the transmitter has no network connection the LINK LED
will not illuminate. While the transmitter is attempting to establish
a connection with a receiver the LINK LED will ash. When the
transmitter has established a stable connection with a receiver the
LINK LED will illuminate solidly.
Bekijk gratis de handleiding van CYP IP-7000TXWP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000TXWP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3619 MB |
