CYP IP-7000TXWP handleiding
Handleiding
Je bekijkt pagina 16 van 52
11
3) Utilities Window: The Utilities window allows users to reset the unit
back to the factory defaults by clicking “Factory Default”. The unit may
be rebooted (without resetting settings) by pressing the “Reboot”
button. If requested by technical support, you may also enable
logging by clicking the “Log Message” checkbox.
If the EDID received from the primary receiver unit (selected via
a checkbox on the preferred receiver in multicast mode) has
compatibility issues with the connected source, a basic internal HDMI
EDID (up to 4K30 w/audio) or basic VGA EDID can be selected. Please
press “Apply” after making the selection.
Note: This EDID setting will be reset if the unit is rebooted.
Finally, individual Telnet commands may be sent to the unit by using
the “Console API Command” text entry eld and pressing “Apply”. Any
responses from the unit will be displayed in the “Output” eld.
Bekijk gratis de handleiding van CYP IP-7000TXWP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000TXWP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3619 MB |
