CYP IP-7000TX handleiding
Handleiding
Je bekijkt pagina 17 van 44
15
4. Transmitter Specic
COMMAND DESCRIPTION AND PARAMETERS
SET_VW_SHIFT N1 N2 {N3} Set the video wall display’s output shift.
Available values for N1:
U [Shift up]
D [Shift down]
L [Shift left]
R [Shift right]
N2 = 0~80000 [Pixel shift amount.
Must be in increments
of 8.]
N3 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N3 makes the setting global to all Receivers.
SET_VW_DELAY N1 {N2} Set the video wall display delay.
N1 = 0~99999 [Delay in
microseconds]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.
5. Receiver Specic
COMMAND DESCRIPTION AND PARAMETERS
SET_EDID_COPY N1 Copy and use the EDID of the connected
display.
Available values of N1:
0 [Disabled]
1 [Enabled]
GET_EDID_COPY Show the state of the EDID copy function.
Bekijk gratis de handleiding van CYP IP-7000TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3389 MB |
