CYP IP-7000RX handleiding
Handleiding
Je bekijkt pagina 20 van 44
20
5. Receiver Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_OUTPUT_RES N1 43 [1080p@25Hz]
44 [1080p@24Hz]
Note: Downscaling is limited to 1/2 of the
horizontal/vertical pixels of the source. For
example: 3840×2160 (4K) to 1920×1080
(1080p) is OK, but 3840×2160 (4K) to
1280×720 (720p) or 640×480 is not. When
outputting to a video wall, the resolution of
the entire video wall together (rather than
each individual display) should be used for
this calculation.
SET_VW N1 Enable/disable video wall functionality.
Available values for N1:
0 [Disable]
1 [Enable]
GET_VW Show video wall functionality status.
SET_VW_OSD N1 Enable/disable video wall OSD to display
the Target Receiver number on the
connected display.
Available values for N1:
0 [Disable]
1 [Enable]
GET_VW_OSD Show the current video wall OSD state.
SET_VW_LAYOUT N1 N2 Set the video wall’s total horizontal and
vertical display count.
N1 = 1~16 [Horizontal display
count]
N2 = 1~16 [Vertical display
count]
GET_VW_LAYOUT Show the video wall’s total horizontal and
vertical display count.
Bekijk gratis de handleiding van CYP IP-7000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3333 MB |
