CYP IP-7000RX handleiding
Handleiding
Je bekijkt pagina 18 van 44
18
4. Transmitter Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_VW_DELAY N1 {N2} Set the video wall display delay.
N1 = 0~99999 (Delay in
microseconds)
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained
by turning on the Video Wall OSD. Omitting
N2 makes the setting global to all Receivers.
5. Receiver Specific
COMMAND DESCRIPTION AND PARAMETERS
SET_EDID_COPY N1 Copy and use the EDID of the connected
display.
Available values of N1:
0 [Disabled]
1 [Enabled]
GET_EDID_COPY Show the state of the EDID copy function.
R N1 Select the VoIP transmission channel to
display.
N1 = 0~255
GET_RX_CHANNEL Show the currently selected VoIP
transmission channel.
Bekijk gratis de handleiding van CYP IP-7000RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3333 MB |
