CYP IP-7000H-TX handleiding
Handleiding
Je bekijkt pagina 16 van 48
11
3) Utilities: The Utilities window allows users to reset the unit back to
the factory defaults by clicking “Factory Default”. The unit may be
rebooted (without resetting settings) by pressing the “Reboot” button.
Note: Enable Log Messages is for troubleshooting purposes and should
only be checked if instructed to do so by technical support.
If the EDID received from the primary receiver unit (selected via
a checkbox on the preferred receiver in multicast mode) has
compatibility issues with the connected HDMI source, the default
HDMI EDID (up to 4K30 w/audio) can be applied. Please press “Apply”
to activate it.
Note: This EDID setting will be reset if the unit is rebooted.
Finally, individual Telnet commands may be sent to the unit by using
the “Console API Command” text entry eld and pressing “Apply”. Any
responses from the unit will be displayed in the “Output” eld.
4) Statistics: The Statistics window shows all available information about
Bekijk gratis de handleiding van CYP IP-7000H-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000H-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3534 MB |
