CYP IP-7000C-TX handleiding
Handleiding
Je bekijkt pagina 33 van 48
28
COMMAND
Description and Parameters
set_vw_shift N1 N2 {N3}
Set the video wall display’s output shift.
Available values for N1:
U [Shift up]
D [Shift down]
L [Shift left]
R [Shift right]
N2 = 0~80000 [Pixel shift. Must be in increments of 8.]
N3 = 0~255 [Target Rx {Optional}]
Note: Target receiver number can be obtained by turning on the Video Wall OSD.
Omitting N3 makes the settings global to all receivers.
set_auto_scan N1
Enable/disable the auto scan function.
Available values for N1:
0 [Disable]
1 [Enable]
get_auto_scan
Get the auto scan function status.
set_serial_baud N1
Set the serial baud rate.
Available values for N1:
0 [300 baud]
1 [600 baud]
2 [1200 baud]
3 [2400 baud]
4 [4800 baud]
5 [9600 baud]
6 [19200 baud]
7 [38400 baud]
8 [57600 baud]
9 [115200 baud]
get_serial_baud
Show the current serial baud rate.
Bekijk gratis de handleiding van CYP IP-7000C-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000C-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3554 MB |
