CYP IP-7000C-TX handleiding
Handleiding
Je bekijkt pagina 29 van 48
24
COMMAND
Description and Parameters
set_jumbo_mtu N1
Enable/disable the jumbo frame MTU.
Available values for N1:
0 [Disabled]
1 [Enabled]
get_jumbo_mtu
Show the jumbo frame MTU state.
get_hardware_version
Show the current hardware version.
factory_reset N1
Perform a factory reset on the unit and select the IP mode after the reset
completes.
Available values for N1:
0 [Reset into Static IP mode]
1 [Reset into Auto IP mode]
2 [Reset into DHCP mode]
reboot
Reboot the unit.
set_tx_channel N1
Set the VoIP transmission channel.
N1 = 0~255 [Transmission channel]
get_tx_channel
Show the current VoIP transmission channel.
set_quality N1
Set the Tx video optimization mode.
Available values for N1:
0 [Graphic optimized mode]
1 [Video optimized mode]
get_quality
Show the current Tx video optimized mode.
Bekijk gratis de handleiding van CYP IP-7000C-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7000C-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3554 MB |
