CYP EL-8500VA handleiding
Handleiding
Je bekijkt pagina 18 van 88
18
VIDEO
2
ND
LEVEL 3
RD
LEVEL 4
TH
LEVEL
HDCP Setting (Cont.) HDCP On HDBT 2 ENABLED
Disabled
HDCP On HDMI 1 ENABLED
Disabled
HDCP On HDMI 2 ENABLED
Disabled
HDCP On HDMI 3 ENABLED
Disabled
HDCP On HDMI 4 ENABLED
Disabled
1) HDMI Out Bypass: Enable or disable the video output bypass
mode. When bypass is enabled, HDR video and bitstream audio can
be supported, however, it will disable the unit’s scaling and video
adjustment functions.
Note: This setting affects both the HDMI and HDBaseT outputs. This
setting does not enable audio bypass.
2) Output Route: Select the video input to route to both outputs.
3) Output Resolution: Select the output resolution to use when HDMI
bypass is disabled. Selecting a “Native” resolution option will make the
unit automatically select an output resolution based on the detected
EDID of the connected display.
Note: Not active when HDMI bypass mode is enabled.
4) Aspect: Select the aspect ratio to use when outputting the source.
“Full” stretches the source to fill the output resolution, regardless
of the original aspect ratio, while “Best Fit” will always attempt to
retain the original source’s correct aspect ratio by adding black bars
if necessary. “Follow In” centres the source on the screen, without any
scaling (1:1 pixel reproduction).
Note: Not active when HDMI bypass mode is enabled.
Bekijk gratis de handleiding van CYP EL-8500VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-8500VA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5915 MB |
