CYP EL-7500V handleiding
Handleiding
Je bekijkt pagina 23 van 40
23
6.7 RS-232 Control
UNIT TERMINAL SERIAL PORT SETTINGS
Pin Pinout Pin Pinout Baud Rate 19200
1 1 Data Bits 8
2 TxD 2 RxD Parity Bit None
3 RxD 3 TxD Stop Bits 1
4 4 Flow Control None
5 GND 5 GND
6 6
7 7
8 8
9 9
6.8 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start, type “cmd” in the search eld, and press
Enter.
Windows XP Click Start > Run, type “cmd”, and press Enter.
Mac OS X Click Go > Applications > Utilities > Terminal.
Once in the Command Line Interface (CLI) type “telnet” followed by the
IP address of the unit (and the port number if it is non-standard) and then
hit “Enter”. This will connect us to the unit we wish to control. Type “help”
to list the available commands. See below for reference.
Note: If the IP address is changed then the IP address required for Telnet ac-
cess will also change accordingly.
Bekijk gratis de handleiding van CYP EL-7500V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-7500V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2748 MB |
