CYP EL-7500V handleiding
Handleiding
Je bekijkt pagina 17 van 40
17
SETUP
2ND LEVEL 3RD LEVEL
Factory Reset
Key Lock OFF
On
Power Save OFF
On
IP Mode DHCP
Static
Set Static IP IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Def. Gateway: 192.168.1.254
Free Run Color Black
BLUE
1) Factory Reset: Selecting this will reset the unit’s settings back to their
factory defaults.
2) Key Lock: Enable or disable the front panel key lock. When enabled,
no inputs or settings can be adjusted using the front panel buttons
other than disabling the key lock setting itself.
3) Power Save: Enabling this function will cause the unit to
automatically switch into stand-by mode if there is no live signal, and
no user interaction for a period of 3 minutes.
4) IP Mode: Select the IP address acquisition mode. When the unit is set
to DHCP mode it will attempt to automatically obtain an IP address
from a DHCP server. When set to Static mode the unit will use the user
defined static IP information.
5) Set Static IP: Manually set the IP address, netmask and gateway
address to use when the unit is in Static IP mode.
6) Free Run Color: Selects the free run color to use when no live input
source is detected.
Bekijk gratis de handleiding van CYP EL-7500V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-7500V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2748 MB |
