CYP EL-7500V handleiding
Handleiding
Je bekijkt pagina 14 van 40
14
DISPLAY
2ND LEVEL 3RD LEVEL 4TH LEVEL
Size (Cont.) Under 2
Under 1
Mode Info Off
INFO
On
Input HDCP Off
ON
PC (PC Sources Only) Auto Setup
H Position
V Position
Phase
Clock
WXGA/XGA XGA
WXGA
Reset
1) Output: Selects the scaled output resolution to use.
2) Size: Selects the aspect ratio to use when outputting the source. “Full”
stretches the source to fill the output resolution, regardless of the original
aspect ratio, while “Follow Input” will always attempt to retain the original
source’s correct aspect ratio by adding black bars if necessary.
3) Mode Info: Enable or disable the information OSD. Selecting “INFO”
will result in the information display being visible after a source or
resolution change for only a short while.
4) Input HDCP: Enables or disables HDCP support for all HDMI inputs.
5) PC: These settings control the input specifications to use with the VGA
inputs. Activating the Auto Setup function forces the unit to attempt to
detect the correct values. Selecting reset will reset all VGA input settings.
Note: The "Auto Setup" function requires a VGA source with a bright, edge-
to-edge, image to accurately judge the dimensions of the signal.
Bekijk gratis de handleiding van CYP EL-7500V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-7500V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2748 MB |
