CYP EL-7400V handleiding
Handleiding
Je bekijkt pagina 24 van 64
24
4) Transparent: Set the transparency level of the OSD menu. A setting of
50 is completely opaque.
5) Display: Enable or disable the information display and set the length
of time for the information display to be visible after a source or
resolution change.
6) Reset OSD: Selecting this will reset all OSD settings back to their
factory defaults.
ETHERNET
2ND LEVEL 3RD LEVEL
IP Mode STATIC
DHCP
Telnet Login OFF
On
Setup Static IP Static IP:
192.168.1.50
Mask: 255.255.255.0
Gate: 192.168.1.254
IP
[Current Status]
MAC
1) IP Mode: Select the IP address acquisition mode. When the unit is set
to DHCP mode it will attempt to automatically obtain an IP address
from a DHCP server. When set to Static mode the unit will use the user
defined static IP information.
2) Telnet Login: Enable or disable requiring a login to control the unit
via Telnet.
3) Setup Static IP: Manually set the IP address, netmask and gateway
address to use when the unit is in Static IP mode.
4) IP: Displays the unit’s current IP address.
5) MAC: Displays the unit’s MAC address.
Bekijk gratis de handleiding van CYP EL-7400V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-7400V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4216 MB |
