CYP EL-5500-HBT handleiding
Handleiding
Je bekijkt pagina 19 van 28
19
6.8 Telnet Control
Before attempting to use the Telnet control, ensure that both the Scaler
(via the LAN port) and the PC/Laptop or control system being used are
connected to the same active network.
To access the Telnet control in Windows 7, click on the 'Start' menu and
type 'cmd' into the Search field then press Enter (see below for reference).
Under Windows XP, go to the 'Start' menu and click on 'Run', type 'cmd'
then press Enter.
Under Mac OS X, go to the file menu then navigate to
Go
→
Applications
→
Utilities
→
Terminal (see below for reference).
Once in the command line interface (CLI) type 'telnet' along with the IP
address of the unit you wish to control (see below for reference).
This will bring us into the device which we wish to control.
Note: The IP address can be obtained from the OSD menu under Information.
If the IP is changed then the IP Address required for Telnet access will also
needs to be change accordingly.
Bekijk gratis de handleiding van CYP EL-5500-HBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-5500-HBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2206 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3200 g |
| Breedte | 440 mm |
| Diepte | 440 mm |
| Hoogte | 50 mm |
