CYP EL-42PIP handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 24 van 48
24
6.6.8 HDCP Management
COMMAND
DESCRIPTION VARIABLES
SET IN N1 MATRIX HDCP MODE N2
Set the HDCP mode to use with Input
N1 in matrix mode.
N1 = 1~4 [Input number]
Available values for N2:
0 [Disable HDCP]
1 [Refer to source]
2 [Refer to display]
GET IN N1 MATRIX HDCP MODE
Show the HDCP mode currently used
with Input N1 in matrix mode.
N1 = 1~4 [Input number]
SET IN N1 MULTIVIEW HDCP MODE N2
Set the HDCP version to enforce on
Input N1 in multiviewer mode.
N1 = 1~4 [Input number]
Available values for N2:
0 [Disable HDCP]
1 [HDCP 1.4]
2 [HDCP 2.2]
GET IN N1 MULTIVIEW HDCP MODE
Show the HDCP mode currently used
with Input N1 in multiviewer mode.
N1 = 1~4 [Input number]
SET WINDOW OUT N1 HDCP MUTE N2
Set the behavior of Output N1 if
the HDCP version of a source is not
supported.
N1 = A~B [Output letter]
Available values for N2:
0 [Blank Window]
1 [Disable Output]
GET WINDOW OUT N1 HDCP MUTE
Show the behavior of Output N1 if
the HDCP version of a source is not
supported.
N1 = A~B [Output letter]
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.

Bekijk gratis de handleiding van CYP EL-42PIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCYP
ModelEL-42PIP
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3608 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht3500 g
Breedte438 mm
Diepte269 mm
Hoogte49 mm