CYP EL-41HP-4K22 handleiding
Handleiding
Je bekijkt pagina 13 van 24
13
COMMAND DESCRIPTION AND PARAMETERS
AUTO_SWITCH N1 Enable or disable auto switching mode.
Available values for N1:
0 [Disabled]
1 [Enabled]
AUTO_SWITCH Show current auto switching mode status.
FADEFAULT Reset the unit to the factory defaults.
REBOOT Reboot the unit.
VER Show the unit’s current firmware version.
IPCONFIG Show the current IP configuration.
SIPADDR N1 Set the static IP Address.
N1 = X.X.X.X [X = 0~255]
SNETMASK N1 Set the Ethernet netmask.
N1 = X.X.X.X [X = 0~255]
SGATEWAY N1 Set the Ethernet gateway.
N1 = X.X.X.X [X = 0~255]
HTTPPORT N1 Set the HTTP port.
N1 = 0~65535
TELNETPORT N1 Set the Telnet port.
N1 = 0~65535
IPMODE N1 Set the current IP address mode.
Available values for N1:
0 [Static IP]
1 [DHCP]
READMAC Show the unit’s MAC address.
UPDATE Update firmware.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Bekijk gratis de handleiding van CYP EL-41HP-4K22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-41HP-4K22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1840 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1300 g |
| Breedte | 219 mm |
| Diepte | 156 mm |
| Hoogte | 43 mm |
