CYP DS-VWC handleiding
Handleiding
Je bekijkt pagina 19 van 48
19
6.3.4 Pre-Defined Video Wall Layouts
The position, size and angle of the display connected to each unit is set
in the Layout window when in Rotation Mode. If you are currently in
the Setting window, clicking on the “Layout” button in the upper-left
“Common” section of the window will switch back to the Layout window
and activate Rotation mode.
The outline of the layout window represents the source video (1920×1080
pixels) and each display must be placed within this space, without
exceeding the edges (not including bezel size, if active). Each display
contains a number which matches the ID number of the unit that is
connected to it and the size/position of each display (listed to the left)
is measured in pixels relative to its size/position within the layout space.
Pre-defined layouts do not include bezel compensation.
Note: Video wall configuration and warping is not available in Scaler Mode.
This control software provides a number of common, pre-defined, video
wall configurations which can be selected and easily applied to any
connected units. All pre-defined configurations are designed around
video walls containing 4 displays.
1) Selecting Pre-Defined Layouts: Select any of the provided pre-
defined layouts from the right-hand scroll bar. After selecting a new
layout, you must confirm that you wish to leave the current layout.
Note: It is not possible to save changes to the pre-defined layouts.
Switching to a new layout will remove any changes made to the current
layout.
Bekijk gratis de handleiding van CYP DS-VWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | DS-VWC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3951 MB |
