CYP CR-TG2 handleiding
Handleiding
Je bekijkt pagina 15 van 84
9
7
RS-232 CTL 4-pin Terminal Block (Top): Connect to a PC, laptop,
or serial controllable device with a 3-pin adapter cable to send
automation RS-232 commands to control the device or for the
extension of RS-232 signals between both ends of the HDBaseT
connection.
RS-232 CLI 4-pin Terminal Block (Bottom): Connect directly to a
PC, laptop, or other serial control device with a 3-pin adapter cable to
send RS-232 commands to control this unit.
Note: The 24 volt pins are included to provide power to a dedicated
external control product and should NOT be used when connecting a
standard RS-232 device.
8
RELAY OUT 8-pin Terminal Blocks 1~4: Connect up to 4 devices that
can be powered and controlled via a DC 0~24V/5A relay connection
such as curtains, projection screens, or lights.
Note: Relay pairs are aligned vertically.
9
R/L 2-pin Terminal Block Set: Connect to unpowered 4Ω speakers
for analogue stereo audio output. Up to 20W of power is provided to
each speaker.
Note: Only LPCM 2.0 sources are supported. Bitstream sources will be
automatically muted.
10
DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
Bekijk gratis de handleiding van CYP CR-TG2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-TG2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5989 MB |
