CYP CR-TG2 handleiding
Handleiding
Je bekijkt pagina 12 van 84
6
6.2 Rear Panel (Transmitter)
CAT5e/6/7 OUT
CONTROL
KEYPAD
1 2
1
CAT 5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver with
a single Cat.5e/6/7 cable for transmission of all data signals. Power
via PoH is also supplied to this unit via the connected compatible PSE
receiver.
2
KEYPAD CONTROL Port: Connect directly to the RJ-45 style RS-232
port on a compatible control keypad to provide power to it and to
allow remote control over the system.
Note: The signal carried over this port is RS-232 plus power. It is not
compatible with any standard Ethernet products. Connecting non-
compatible products to this port is not supported and may result in
damage to the connected unit.
6.3 Bottom Panel (Transmitter)
1
1
USB 2.0 Port (Type-A): This port is reserved for firmware update use
only.
Note: This port will be unavailable when the unit is installed in a wall.
Bekijk gratis de handleiding van CYP CR-TG2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-TG2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5989 MB |
