CYP CR-KP3 handleiding
Handleiding
Je bekijkt pagina 17 van 30
17
6.6.1 Marco Setting
Click on the “Macro Settings” tab to execute/edit the settings for the
physical macro buttons. These macros can be executed by pressing the
physical buttons on the keypad as well as via the WebGUI or Telnet.
• Macro 1: Sequentially light all red LEDs on the keypad with 100%
brightness and a delay of 500ms between commands
• Macro 2: Sequentially light all blue LEDs on the keypad with 100%
brightness and a delay of 500ms between commands
• Macro 3: Switch off all red LEDs (set brightness to 0%)
• Macro 4: Switch off all blue LEDs (set brightness to 0%)
• Macro 5: LED demo mode toggle (switch on/off Demo Mode)
• Macro 6: Light the blue LEDs with 10% brightness
→
set all blue LEDs to
0% brightness
→
switch off & on relay 1
→
switch off & on relay 2 with a
delay of 1000ms between commands
Note: Demo Mode is on by default. To disable Demo Mode please click the
switch at the bottom of this WebGUI tab.
The “Background Light” slider allows the user to adjust the overall brightness
of the keypad’s LEDs.
Click on the icon to edit each button’s macro.
At the top of the Macro edit window is a text field where you can edit the
name of the macro. Type your new macro name into the box and then
click the icon to save it.
Within the edit window the up/down arrows will change the command’s
Bekijk gratis de handleiding van CYP CR-KP3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-KP3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2534 MB |
