CYP CR-IPS4 handleiding
Handleiding
Je bekijkt pagina 7 van 36
1
1. INTRODUCTION
The CR-IPS4 is a Control System Centre for users to control a variety of
serial devices. This four way version supports RS-232 at each I/O port and
1 port for the additional use of RS-422 or RS-485. Users can connect up to
four devices simultaneously and control them via a 3 (or 5)-pin adapter
cable to send RS-232/422/485 commands from this unit. Comprehensive
user control interfaces are available, including WebGUI, Telnet, and
console (RS-232 in).
This unit can be powered either by a 12V/1.25A adapter or Power over
Ethernet (PoE), allowing it to be powered directly from a standard
PoE network switch without the need for an external power adapter,
providing incredible installation exibility.
The LEDs on the board provide status indicators for users to check: power
and Ethernet status. It supports IEEE 802.1x RTS/CTS protocol to avoid
hidden stations. The unit also provides a hotkey for convenient rmware
updates.
2. APPLICATIONS
Smart home control
Product showroom
Factory and building automation
Meeting room control
Security surveillance and control
3. PACKAGE CONTENTS
1× IP to RS232/422/485 Control Box
1× 12V/1.25A DC Power Adapter
4× 5-pin Terminal Block
1× Shockproof Feet (Set of 4)
1× Operation Manual
Bekijk gratis de handleiding van CYP CR-IPS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-IPS4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2746 MB |
