CYP CR-IPS1 handleiding
Handleiding
Je bekijkt pagina 7 van 36
1
1. INTRODUCTION
The CR-IPS1 Control System Centre is for users to control a single Serial
device of any variety. It supports one RS-232/422/485 port. Users can
connect device and control it via a 3 (or 5)-pin adapter cable to send RS-
232/422/485 commands from this unit. Comprehensive user control
interfaces are available, including WebGUI, Telnet, and console (RS-232
in).
This unit can be powered either by a 12V/1.25A adapter or Power over
Ethernet (PoE), allowing it to be powered directly from a standard
PoE network switch without the need for an external power adapter,
providing incredible installation exibility.
The LEDs on the board provide status indicators for users to check: power
and Ethernet status. It supports IEEE 802.1x RTS/CTS protocol to avoid
hidden stations. The unit also provides a hotkey for convenient rmware
updates.
2. APPLICATIONS
Smart home control
Product showroom
Factory and building automation
Meeting room control
Security surveillance and control
3. PACKAGE CONTENTS
1× IP to RS232/422/485 Control Box
1× 12V/1.25A DC Power Adapter
1× 5-pin Terminal Block
1× Shockproof Feet (Set of 4)
1× Operation Manual
Bekijk gratis de handleiding van CYP CR-IPS1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-IPS1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2676 MB |
