CYP CR-CS4 handleiding
Handleiding
Je bekijkt pagina 7 van 36
2
2× 6-pin Terminal Block
4× 2-pin Terminal Block
1× Shockproof Feet (Set of 4)
1× Operation Manual
4. SYSTEM REQUIREMENTS
Equipment which can be controlled via Telnet, serial, IR remote or relay.
An active internet connection from a switch or router for control of
Ethernet devices.
5. FEATURES
16 trigger inputs linked directly to 16 user macros allowing for instant
control activation
16 additional macros (32 total) that can be activated via Ethernet, or on
a dened schedule
4 power relays to control devices such as projector screens, lighting,
etc.
4 IR outputs to control devices such as TVs, media players, etc.
Integrated IR input for IR code learning functionality
2 serial ports for controlling RS-232/422/485 devices
16 variable voltage outputs for controlling low power devices (20mA
total) or activating external triggers
Note: Trigger Buttons and Voltage Out ports cannot be used at the same
time.
Battery backed up clock for scheduling events
Can optionally be powered via PoE (802.3at Type 2)
Case is designed to be installed within our 6U Rack Chassis or it can be
mounted directly onto any at surface
Controllable via WebGUI, Telnet, and external triggers
Bekijk gratis de handleiding van CYP CR-CS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3052 MB |
