CYP CR-CS4 handleiding
Handleiding
Je bekijkt pagina 25 van 36
20
End: Set the month, week, day and time for the end of DST in the
current time zone.
6.7 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
Start your preferred Telnet/Console client, or use the built in client
provided by most modern computer operating systems. After starting
the client, connect by using the current IP address of the unit and port
23 (if the communication port number used by the unit has not been
changed previously). This will connect us to the unit we wish to control
and commands may now be entered directly.
Note 1: If the IP address of the unit is changed then the IP address required for
Telnet access will also change accordingly.
Note 2: This unit defaults to DHCP mode. The current IP address can only be
veried using the Device Discovery software. The default communication port
is 23.
6.8 Telnet Commands
COMMAND
Description and Parameters
help
Show the full command list
help N1
Show details about the specied command.
N1 = {Command Name}
?
Show the full command list
Bekijk gratis de handleiding van CYP CR-CS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3052 MB |
