CYP CR-CS2 handleiding
Handleiding
Je bekijkt pagina 21 van 28
21
For plain text commands, simply enter the text command into the entry
window. Click on “Save Change” to save the command.
To learn an IR command, rst make sure the included IR Receiver is
connected to the unit’s IR IN port, then press “IR Learn” within the
command edit window. After doing this a notice will appear in the
WebGUI to send the IR signal within 5 seconds. When you see this, point
your remote control at the IR receiver and press the button that contains
the command you wish to learn. A command string will then appear in
the text entry window containing the information captured from the IR
remote. Click on “Save Change” to save the command.
Note: Some commands may require a carriage return (e.g. \r or \x0D) at the
end to be accepted by the destination device.
For IR command saving, insert the command on the bottom column and
click on CYP/RAW HEX which indicate the IR command type and click
on Save changes to store the command. Under uncertainty of the IR
command type click on RAW HEX to ensure a successful command saving.
Command under 128 characters including space can be build up to 128
commands, command over 128 characters and under 512 characters
including space can be build up to 32 command in addition with 96
commands of 128 characters under. Click on Save Change to save the
command inserted.
Bekijk gratis de handleiding van CYP CR-CS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2034 MB |
