CYP CR-CS2 handleiding
Handleiding
Je bekijkt pagina 13 van 28
13
6.5 Software Application
Please obtain the Device Discovery software from your authorised dealer
and save it in a directory where you can easily nd it.
Note: By default the unit is set to automatically obtain an IP address via DHCP.
Connect the unit and your PC/Laptop to the same active network and run
the Device Discovery software. Click on “Find Devices on Network” and
a list of devices connected to the local network will show up indicating
their current IP address.
By clicking on one of the listed devices you will be presented with the
network details of that particular device. If you choose, you can alter the
DHCP IP network settings for the device, or switch the unit into Static
mode to x the devices IP address. To switch to Static mode, please select
Static from the IP mode drop-down, apply associated IP credentials then
click “Save” followed by “Reboot”
Once you are satised with the network settings, you may use them to
connect via telnet or WebGUI. The network information window provides
a convenient link to launch the WebGUI directly.
Bekijk gratis de handleiding van CYP CR-CS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | CR-CS2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2034 MB |
