Cylinda DM8493PRO handleiding
Handleiding
Je bekijkt pagina 27 van 49
AlternativesAdvanced Settings
See Water hardness in the
chapter Before washing for the
first time.
For a water supply with a hard-
ness above 5 °dH (9 °fH / 6 °eH
/ 0.9 mmol/l), fill with salt.
For a water supply with a hard-
ness below 6°dH (10°fH / 7°eH
/ 1.0 mmol/l), select 0. The wa-
ter softener is deactivated and
no salt needs to be added.
This dishwasher has been de-
signed to be able to be connec-
ted to an electrical supply net-
work with fuses for 10 A or 16
A.
10 A/16 APower
The water in the dishwasher will
be heated more quickly, and the
dishwashing program will run
more quickly, if you select 16 A.
Select 10 A or 16 A according
to the electrical supply network
in your property.
Select whether the interior light
is to be switched on when the
dishwasher is turned off and the
door is opened. (If is turned
on, the interior light is always
switched on when the door is
opened.)
On/OffInterior light at power off
Any error messages.Failure readout
When contacting your service
centre, you may be asked to
provide the most recent error
messages.
Temperatures can be displayed
in °C (Celsius) or °F (Fahrenheit).
o
C/
o
FTemperature unit
Setting to prevent a dishwash-
ing program from starting when
the salt compartment is empty.
On/OffBlock start when softener is
empty
This setting is not active if Water
hardness is set to 0.
Restores all settings to the fact-
ory defaults.
Factory reset
Select Factory reset and press
.
Select Exit to exit the menu for
Settings, press .
Exit
27
Bekijk gratis de handleiding van Cylinda DM8493PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cylinda |
| Model | DM8493PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4414 MB |
