Cylinda DM8493PRO handleiding
Handleiding
Je bekijkt pagina 21 van 49
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is cut during drying, the program is interrupted.
If you open the door for more than 2 minutes during drying, the program will be interrupted.
Emergency opener
If the dishwasher loses power when Sani lock or Lock is activated, the door can be opened with the
emergency opener.
Push the emergency opener into the bottom edge of the door. Pull the emergency opener until the
dishwasher door opens. Then refit the emergency opener.
Emergency opener
WARNING!
To prevent the risk of burn injuries, wait until the dishwasher has cooled before opening the door
with the emergency opener!
Exercise caution! The edges may be sharp. Wear protective gloves!
Once the program has finished
Once the program has finished, "Program done" appears on the display.
At the end of the program one short signal will sound. Chapter Settings describes how to change this
function.
The dishwasher automatically enters standby mode after the program has finished. Shut off the water
tap after each use (if required by your insurance company).
The best drying results
• Fully load the dishwasher.
• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
• Top up with rinse aid or increase the rinse aid dosage setting.
• Activate the Automatic door opening option.
• Activate the Automatic door opening setting.
• Allow the dishes to cool before unloading the dishwasher.
21
Bekijk gratis de handleiding van Cylinda DM8493PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cylinda |
| Model | DM8493PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4414 MB |
