Cylinda DM8492PRO handleiding
Handleiding
Je bekijkt pagina 9 van 42
Basic settings
Open the door. Press .
"Welcome to your new dishwasher. This is a first time setup." is shown on the display. It is important
that you choose the right settings to ensure good dishwashing results.
Select setting with or . Confirm selected setting with .
Settings
Select the language to be shown on the display.Language
Drying is faster and a better result is achieved if you use
rinse aid. You will also achieve a better dishwashing result
with clear and spotless dishes.
Rinse aid 0/1/2/3/4/5
Pre-selected at factory: 4
The rinse aid dispenser can be adjusted between 0 (Off) and
5 (High dosage).
Adjusting the water softener. Select a setting depending on
the hardness of the water supply. It is important that this
setting is correct!
Water hardness 0/1/2/3/4/5/6/7/8/9
Pre-selected at factory: 6
For a water supply with a hardness above 5 °dH (9 °fH /
6 °eH / 0.9 mmol/l), fill with salt.
For a water supply with a hardness below 6°dH (10°fH / 7°eH
/ 1.0 mmol/l), select 0. The water softener is deactivated and
no salt needs to be added.
Activate this setting when using an all-in-one detergent that
contains rinse aid.
TAB On/Off
(All-in-one detergent)
This setting reduces the rinse aid dosage and affects how
often the dishwasher's built-in softener is regenerated.
Pre-selected at factory: Off
Select Save and exit, press .Save and exit
To change the selected setting, see the chapter Settings.
9
Bekijk gratis de handleiding van Cylinda DM8492PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cylinda |
| Model | DM8492PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3777 MB |
