Cylinda DM8492PRO handleiding
Handleiding
Je bekijkt pagina 18 van 42
Sani
1)
An ideal program when hygiene demands are set high. The temperature of the main wash is 60 °C.
The final rinse is 85 °C for 4 minutes.
Sani quick
A quick program when hygiene demands are set high. The temperature of the main wash is 50 °C.
The final rinse is 85 °C for 4 minutes.
Self-cleaning
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using dishwasher detergent or citric acid.
Special dishwasher cleaners are also available on the market. For the removal of limescale deposits,
see Dishwasher tub in the chapter Care and cleaning.
Start/Stop
Press until the display shows "Program started, close door". This indicates that the dishwasher
is ready to start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last time the control
panel was pressed, the machine switches off.
Stopping or changing a program
If you want to change program after starting the dishwasher, open the door then press and hold
for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then select
a new program, press and close the door.
Remaining time
Once you have chosen a program, the time the programme took when last used is displayed.
Once you have started the dishwasher, the display shows the remaining program time. The remaining
time is updated during the drying phase.
This may differ somewhat from time to time depending on the temperature of the water supply, the
amount of dishes, the ambient temperature and other factors.
During the first run of each program, the remaining time displayed can be slightly misleading, as the
dishwasher is estimating the time. When you run the program a second time, the dishwasher will
calculate the remaining time based on the previous duration of the program.
If you want to load more dishes
2)
Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a while,
the dishwasher continues the program.
1)
Program button .
To change which pre-selected program is assigned to the program button , select the desired
program in the menu and then press and hold the program button for five seconds.
2)
You should not load more dishes if the lid of the detergent dispenser has been opened.
18
Bekijk gratis de handleiding van Cylinda DM8492PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cylinda |
| Model | DM8492PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3777 MB |
