CyberPower PDU13104 handleiding
Handleiding
Je bekijkt pagina 25 van 42
23
Installation Guide
Output Power Cord
Step 1. Align and insert the Cable Tie from the upper side of the
Fixed Stand and fasten it as shown below.
Electrical Installation
Step 1. Receptacle evaluation
Ensure that the plug type of your PDU unit matches the
receptacle type that you are using. Plug type may vary by
model.
Step 2. Plug the PDU into a compatible AC power source.
Step 3. Attach equipment
It is extremely important not to exceed the PDUs maximum
current load (as outlined in the Specifications section). In
order to determine your total load, simply use the LCD screen
on the front of the PDU to monitor the load being attached.
The PDU must be plugged into a three-wire, grounded receptacle
only. The receptacle must also be connected to an appropriate branch
circuit/main with fuse or circuit breaker protection. Connection to any
other type of receptacle may result in a shock hazard.
Locking Power Cord - For IEC Type PDU
Bekijk gratis de handleiding van CyberPower PDU13104, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CyberPower |
| Model | PDU13104 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5499 MB |