CyberPower CPS5000PRO handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 6 van 20

CPS3500&CPS5000 Series

Copyright © 2014 CyberPower Systems, Inc.

5

5. AC Output Circuit Breaker

Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.

*Note: Circuit breaker 5a provides max 40A protection for 1a socket.

*Note: Circuit breaker 5b provides max 12A protection for UK socket or 16A for Schuko/France socket.

6. AC Input Circuit Breaker

Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.

7. Battery Input Wiring Fault LED

Battery input wiring fault LED will illuminate and make an audible alarm to indicate the wiring polarity is

reversed only when the DC circuit breaker is off.

*Note: Please make sure the DC circuit breaker is off before connecting the battery to the machine.

8. Output Selector

For PRO series, Output Selector provides four most common operation situations for switch include Normal,

Bypass with AVR, Bypass and Off. No matter under what situations, the charger would keep charging

external batteries if utility power is still alive.

Normal: The unit will provide all functions of uninterruptible power supply include charger.

Bypass with AVR: The unit will bypass the utility power with voltage regulator and shutdown the unit when the utility

power exceeds 300Vac or below 140Vac.

Bypass: The unit will bypass the utility power to output directly.

*Note: Bypass model would not provide any overvoltage protection .Utility power may damage equipment plugged to EPS.

Make sure equipment safe before switch to this model.

Off: The unit will interrupt all outlets power output.

*Note: The charger would still work under these four switch modes.

*For PIE Series, the unit provides specific Bypass function.

Bypass: The switch provides the bypass for charge only and shutdown the unit when the utility power exceeds 300Vac or

below 140Vac. In charger only mode, AVR and battery backup will not work.

9. Power Switch

Used as the master on/off switch for equipment connected to the battery power supplied outlets.

10. Power ON Indicator

This LED is above the power switch. It illuminates when the utility condition is normal and the EPS outlets

are providing power, free of surges and spikes.

11. LCD Display Toggle / Selected Switch

Users can monitor EPS status and set up functions by using the toggle.

12. Multifunction LCD Readout

High resolution and intelligent LCD display shows all the EPS information with icons and messages. For

more information please check the DEFINITIONS FOR ILLUMINATED LCD INDICATORS section.

13. SNMP/DB9/USB Network slot (only for PRO series)

Remove the cover panel to install optional SNMP/DB9/USB CARD that allows remote monitoring and

control of your EPS through network or cable.

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van CyberPower CPS5000PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Airco