Curtis RFRF300 handleiding

Handleiding

1234567891011121314151617181920212223242526/ 26

Afdrukken

Je bekijkt pagina 5 van 26

4

INSTALLING YOUR FREEZER

UNPACKING YOUR FREEZER

1. Remove all packaging material. This includes the foam base and all adhesive

tape holding the freezer accessories inside and

outside.

2. Inspect and remove any remains of packing, tape or printed

materials before powering on the freezer.

ADJUSTING YOUR FREEZER

• Your freezer is designed for freestanding installation only. It should not be

recessed or built-in.

• Place the freezer on a surface strong enough to support it fully loaded.

• When moving the freezer, never tilt it more than a 45-degree angle.

This could damage the compressor and the sealed system.

• If the freezer is tilted let it stand in an upright position for at least 24 hours

prior to plugging in. This is to allow the refrigerant to settle.

PROPER AIR CIRCULATION

• To assure your freezer works at the maximum efficiency it was designed for,

you should install it in a location where there is proper air circulation, plumbing

and electrical connections.

• The following are recommended clearances around the freezer:

Sides……………4” (102mm)

Back..................4” (102mm)

Top....................4” (102mm)

1234567891011121314151617181920212223242526/ 26

Bekijk gratis de handleiding van Curtis RFRF300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Gerelateerde producten van Curtis (Vriezer)

Handleiding bekijken

Curtis RFRF452

Vriezer - handleiding

Andere merken in Vriezer