Curtis enGage VII handleiding
Handleiding
Je bekijkt pagina 22 van 24
22Curtis Instruments enGage
®
VII Manual
EMC Specications continued
Immunity
Designed to meet the following:
• EN 61000-4-2 Electro-Static Discharge
• EN 61000-4-3 Radiated RF Immunity
• EN 61000-4-4 Electrical Fast Transients
• EN 61000-4-6 Conducted RF Immunity
• EN 61000-6-2 Immunity for industrial environments
Compliance
RoHS 2: enGage VI and enGage VII.
4.0 TROUBLE-SHOOTING
GENERAL
Problem / Possible Cause
No Display –
V+ (keyswitch) voltage not present at J1–1, J1-3.
Battery voltage too low. Battery terminals not connected.
Display Too Dark/Light –
LCD backlight not adjusted correctly.
BDI FUNCTION
Problem / Possible Cause
No Display –
Terminals not connected.
Improper voltage – Check B+ / B- is connected to proper pins (see tables earlier in this manual).
Stays At FULL –
Instrument voltage range selected does not match battery voltage.
V+ connected to wrong terminal.
BDI information coming from CAN network, CAN network value not correct.
Will Not Reset –
Instrument voltage does not match battery voltage.
Battery not fully charged, battery may be defective.
BDI information coming from CAN network, CAN network value not correct.
Bekijk gratis de handleiding van Curtis enGage VII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | enGage VII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2205 MB |
