Curtis enGage NX1 handleiding
Handleiding
Je bekijkt pagina 24 van 47

4 — PROGRAM MENU PARAMETERS
Curtis Model 3150R – April 2025
Return to TOC
pg. 20
e programmable parameters allow you to congure the gauge so that it meets your application’s
requirements. Curtis programming devices provide a user-friendly way to read and write to the
parameters.
Restart the device aer you change a parameter marked as [PCF]. If the device is not restarted, a
Parameter Change fault will occur.
e parameters are grouped into menus. is chapter describes the main menu and the menus
contained by the Program menu. e gauge also provides read-only parameters on the Monitor
menu and Information menu.
e following columns in the parameter description tables contain multiple types of information:
• Parameter and CAN Index: e parameter name, followed by the CAN index and sub-index.
is column also identies parameters marked as [PCF].
Note: CAN indexes and sub-indexes are delimited by colons. For example, a parameter with an
index of 0x640F and a sub-index of 0x00 would be represented as 0x640F:00.
• Va l u es and Raw Values: e allowed values as displayed in Curtis programming devices,
followed by allowed values in raw units suitable for CAN messages.
• Access Level and Default Value. e parameter’s access level for Curtis programming devices,
followed by the default value.
Note: Writes to parameters are automatically saved to the 3150R’s EEPROM. A “save” command
using the CANopen Store Parameters object (0x1010:01) is not required.
Bekijk gratis de handleiding van Curtis enGage NX1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Curtis |
Model | enGage NX1 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 6038 MB |