Curtis enGage NX1 handleiding
Handleiding
Je bekijkt pagina 14 van 47
2 — USING THE 3150R
Curtis Model 3150R – April 2025
Return to TOC
pg. 10
e fault code format depends upon the active user interface. e following table describes how the
user interfaces display two-character fault codes for traction, pump and steering controller faults.
e fault code characters range from 0–9 and A–F:
GUI(s) Description
GUIs 1 and 4 Faults are displayed in the following format:
• Fault source indicator
• The fault code, which consists of a character, a comma, and another character.
• If the fault has a fault type, the fault type is displayed within brackets.
In the following example, the traction and pump faults have fault types and the BMS
fault does not:
GUI 2 Faults are displayed in the following format:
• Fault source indicator
• A colon
• The fault code, which consists of a character, a period, and another character.
Note: GUI 2 does not display fault types.
GUI 5 Faults are displayed in the following format:
• Fault source indicator
• A colon
• The fault code, which consists of a character, a comma, and another character.
• If the fault has a fault type, the fault type is displayed within brackets.
BMS and li lock driver overcurrent faults have dierent formats:
• BMS fault codes consist of three characters:
• Li lock driver Overcurrent faults do not have fault codes. Instead, the screen displays only
the fault source indicator (OC or OverCurrent) described in Table 2-2. e following example
is from GUI 2:
Bekijk gratis de handleiding van Curtis enGage NX1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | enGage NX1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6038 MB |
