Curtis Electronic Code Switch handleiding

Niet gecategoriseerd

Curtis

73 pagina's

PDF beschikbaar

Handleiding

6 — PROGRAMMABLE PARAMETERS

Curtis Electronic Code Switch Module (ECS) – June 2022 Return to TOC

pg. 22

APPLICATION SETUP MENU

e Application Setup menu contains the following menus:

• Control menu

• Relay menu

• CAN Interface menu

• Misc menu

ese menus are used to congure the ECS, and are described in the following topics.

Control Menu

e following table describes the parameters on the Control menu.

APPLICATION SETUP MENU — CONTROL MENU

PARAMETER

CAN INDEX

VALUES

RAW VALUES

DATA SIZE

READ/WRITE

ACCESS LEVEL

DEFAULT VALUE DESCRIPTION

Interlock Type

0x3705:00

0–1

8-bit

OEM Dealer

Indicates whether the interlock signal is controlled by

the interlock input or RPDO1:

0 = Interlock input (pin 2)

1 = RPDO1

Interlock High Threshold

0x3323:00

2.00–30.00V

200–3000

16-bit

OEM Dealer

8.00V

Indicates the high level threshold for the

interlock input.

Mute Enable

0x3701:00

Off/On

0–1

8-bit

Field Basic

Off

Indicates whether the buzzer is muted:

Off = Audible

On = Muted

Logoff Time

0x3702:00

0–255

0–255 min

8-bit

Field Basic

30 min

Indicates the automatic logoff time. If the interlock

signal has been off for the specied time, the ECS

automatically logs the user off.

To disable the automatic logoff, specify 0.

RFID Swipes Logoff

Enable

0x5906:01

Off/On

0–1

8-bit

OEM Dealer

Off

When set to On, species how the ECS operates if a

user swipes the same RFID tag that was last swiped.

The result depends upon the ECS’s operating mode:

• Default mode: If the user is logged on, the ECS

logs the user off.

• Pass-through mode: The ECS clears the RFID 0/1/2

parameters on the Pass Through Mode menu.

Bekijk gratis de handleiding van Curtis Electronic Code Switch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.