Curtis 3301T handleiding
Handleiding
Je bekijkt pagina 33 van 63
3 — INSTALLATION AND WIRING
pg. 27
Return to TOC Curtis Model 3301T – August 2022
BATTERY CONNECTIONS
Connect the battery to the B+ and B– inputs (pins 16 and 15). Curtis recommends that you
include a fuse in the circuit that connects the battery to the B+ input, as shown in Figure 7. The
fuse will protect the power system from external shorts and should be sized according to your
application’s requirements.
KEYSWITCH
e keyswitch input (pin 7) is active high. Connect the keyswitch input to B+ via a keyswitch.
SWITCH 1–5 INPUTS
e switch 1–5 inputs can be congured for various functions. e following table lists the inputs’
pins, functions, and the parameters used to congure the functions:
Switch
Input
Pin Switch
Traction
Fault Code
Hydraulic
Fault Code
Analog Frequency Driver Parameter
1 5 x x x Sender 1 Type
2 13 x x x Sender 2 Type
3 6 x x x Sender 3 Type
4 14 x x x Sender 4 Type
5 8 x x Output Mode
Note: e analog and frequency functions are reserved.
e following sections describe these inputs.
Switch Inputs
e switch 1–4 inputs can be congured as active high (switched to B+) or active low (switched to
B–). Switch input 5 is active high. e switches’ statuses can be used to turn signal icons on or o.
e voltage range of the switch inputs is identical to the B+ operating voltage range. e input signals
must be within the range of threshold voltages listed in the following table:
Threshold Minimum Maximum
Active high 4.0V Maximum B+ voltage
Active low N/A 1.0V
Bekijk gratis de handleiding van Curtis 3301T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 3301T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7803 MB |
