Curtis 1356 handleiding
Handleiding
Je bekijkt pagina 13 van 58

Curtis 1356/1356P CAN Expansion Module Manual, Rev. A
9
Driver Outputs
Each of the two driver outputs (Output 1, 2) is capable of driving a closed-loop
current-controlled proportional valve or a voltage-controlled contactor. Each
driver has independent mode, max, and dither settings.
ese are high-power drivers. e internal impedance to ground will cause
leakage current to ow through the output even when the output driver is o.
is leakage current can be enough (>2 mA) to light high-eciency LEDs.
In the wiring diagram, the output at J1-2 is shown driving a proportional
valve coil. is driver is programmed for Constant Current mode and would
have some Dither applied.
e second output, at J1-12, is driving a basic contactor coil. is output
is in the Constant Voltage mode and can be set to run at a lower voltage than
the nominal battery voltage.
Switch Inputs
All the inputs are used as Active High inputs (“On” when connected to B+).
In the wiring diagram, Input 13 (J1-8) is shown as an Active High input
switching to B+.
(Note that when Input/Output 1 or 2 is used as a switch input, its Op-
eration Mode must be set to 0; see pages 33 and 45.)
Analog Inputs
Analog Input 3, at J1-21, is shown being used with an RTD. is requires
setting Analog Input 3’s Input Type parameter to 1 = Resistive input (see pag-
es34 and 43).
CAN Bus
e 1356 /1356P has an internal 1 kΩ bus termination resistor. is internal
impedance matches the system requirements for a mid-line connection or
short stub connection. e 1356 /1356P can communicate up to 1 Mbit/s on
a properly terminated/wired bus.
2 — INSTALLATION & WIRING: Standard Wiring Diagram
Bekijk gratis de handleiding van Curtis 1356, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Curtis |
Model | 1356 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 7745 MB |