Curtis 1355 handleiding
Handleiding
Je bekijkt pagina 5 van 44
1 — OVERVIEW
pg. 1
Return to TOC Curtis 1355 CANopen Soft Starter Module Manual – September 2020
1 — OVERVIEW
e Curtis Model 1355 is a 5x high-current half bridge output module for so start of electrical
motors. e 1355 is available with either three full actuator outputs or six digital inputs.
e module is designed to give it the exibility to be used in a variety of sweepers/scrubbers. Typically
M1–M3 are used to drive the brushed permanent magnet motors that power the scrubbing brush pads,
and M4–M5 are used to drive the series-wound DC vacuum motors used to recover the used cleaning
solution from the oor. Use the 1355 as an ancillary controller to the vehicle or system manager.
e housing is designed to meet the dicult environment seen in material handling and outdoor
equipment. is water-tight design can survive high shock, vibration, and dust.
Figure 1
Curtis 1355
CANopen so
starter module.
Features include:
• Programmable DC nominal supply: 24V, 36V, or 48V
• Five high-current half bridge drivers for motor loads (M1–M5)
• 3A driver output for a main (line) contactor, with overload protection
• KSI input
• CAN bus port
• readed busbars for B+, B–, and the ve motor loads
Bekijk gratis de handleiding van Curtis 1355, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1355 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5646 MB |
