Curtis 1352 handleiding
Handleiding
Je bekijkt pagina 11 van 40
2 — INSTALLATION AND WIRING
pg. 7
Return to TOC Curtis 1352 eXm Manual, June 2021
WIRING: BASIC CONFIGURATION
A basic wiring diagram is shown in Figure 2, and described below. e diagram shows shows the
standard power and battery connections, as well as a variety of basic uses for the inputs and outputs.
Pin 5
Pin 4
Pin 2
Pin 1
Pin 3
Pin 11
Pin 12
Pin 13
Pin 14
Pin 9
Pin 10
Pin 6
Pin 7
Pin 8
Figure 3
Basic wiring diagram, Curtis 1352 eXm module.
Power Connection
e battery is connected to the module’s B+ pin though a fuse, an optional diode, and a keyswitch.
e fuse protects the wiring in the event of a short or failure. e return path of the coils is also
brought back to the B+ pin to utilize the yback diodes connected inside the eXm between B+ and
each driver output.
e keyswitch is used to turn on the system. When the keyswitch is closed, B+ goes high and the
eXm’s power supply brings up the module.
Bekijk gratis de handleiding van Curtis 1352, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1352 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5176 MB |
