Curtis 1351 handleiding
Handleiding
Je bekijkt pagina 9 van 160
2 — INSTALLATION SPECIFICATIONS AND WIRING
pg. 3
Return to TOC Curtis Model 1351 – February 2024
2 — INSTALLATION SPECIFICATIONS AND WIRING
PHYSICALLY MOUNTING THE 1351 SYSTEM CONTROLLER
Figure 1 is the 1351 System Controller. Its outline and mounting-hole dimensions are in Figure 2.
Mount the controller to a at surface devoid of protrusions, ridges, or a curvature that can cause damage
or distortion to its heatsink (base plate). To simplify the use of the 3-axis accelerometer, mount the
1351 in a level/orthogonal orientation. Secure the controller using evenly torqued bolts to the vehicle’s
mounting surface. When mounted to a metal surface, additional heat sinking or fan cooling is not
necessary to meet the 1351’s peak and continuous current ratings.
When installed with the matching vehicle-harness connector, the 1351 system controller meets the IP65
requirements for environmental protection against dust and water. Nevertheless, in order to prevent
external corrosion and leakage paths from developing, select a mounting location that will keep the
controller as clean and dry as possible.
Figure 1
e 1351 System
Controller
Bekijk gratis de handleiding van Curtis 1351, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1351 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23088 MB |
