Curtis 1229 handleiding
Handleiding
Je bekijkt pagina 10 van 143
2 — INSTALLATION AND WIRING
1229 Manual - OS 1.8 RevA - May 2021
Return to TOC
pg. 4
2 — INSTALLATION AND WIRING
MOUNTING THE CONTROLLER
e 1229 controller’s cover and connections meet the IP65 requirements for environmental protection
against dust and water. In order to prevent external corrosion and leakage paths from developing
chose a mounting location that keeps the controller as clean and dry as possible. Always uphold the
AMPSEAL wire-connection guidelines.
Figure 3 illustrates the 1229 dimensions and mounting-hole locations. Mount the controller using two
evenly torqued M6 or equivalent bolts to a at surface devoid of protrusions, ridges, or a curvature
that can cause damage or distortion to its heatsink (base plate). When properly mounted to a larger
metal surface, additional heat sinking or fan cooling are not necessary to meet the controller’s peak
and continuous current ratings. For ease of service and diagnostic routines, ensure that the chosen
mounting location allows access to the 23-pin AMPSEAL connector and terminals.
Figure 3
Mounting
dimensions,
Curtis 1229
motor controller
122
25.0
5.5
150
2X
Ø 6.7 THRU
13
59
Bekijk gratis de handleiding van Curtis 1229, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1229 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19864 MB |
