Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 36 van 124
3 — PROGRAMMABLE PARAMETERS
Curtis Model 1226BL – July 2024 Return to TOC
pg. 28
e following diagram shows the acceleration rate when full throttle is applied.
For steps on conguring acceleration rates, see Set the Acceleration and Deceleration Rates.
Low and High Speed Brake Deceleration Rates
You can optimize the rates at which a vehicle decelerates when full throttle is applied in the opposite
direction. ese deceleration rates are congured with the Full Brake Rate HS and Full Brake Rate
LS parameters. You can congure dierent deceleration rates for each speed mode.
The deceleration rates are relative to the values of the HS (High Speed) and LS (Low Speed)
parameters; see Fine Tuning Menu.
When full throttle is applied in the opposite direction while the vehicle is traveling between the
specied low and high speeds, the deceleration rate is linearly scaled between the low and high speed
deceleration rates.
Note: e deceleration rates apply to forward and reverse.
Example
Suppose you set the following parameters to the following values:
Parameter Value
LS (Low Speed) 30%
HS (High Speed) 70%
Full Brake Rate LS 3.0s
Full Brake Rate HS 1.5s
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
