Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 17 van 124
2 — INSTALLATION AND WIRING
pg. 9
Return to TOC Curtis Model 1226BL – July 2024
e following table describes the logic connector’s pins and their typically used functions. e table
also identies which pins provide digital switches:
Table 1 Logic Connector Pins
Pin Typical Function
J3-1 Keyswitch
J3-2 Valve driver/Status LED driver
J3-3 Interlock switch
J3-4 Emergency reverse normally closed (NC) switch/Analog 2/Digital 2
J3-5 BDI output
J3-6 Analog 1/Digital 1
J3-7 Pot wiper
J3-8 Reverse switch
J3-9 Lift switch
J3-10 Coil Supply
J3-11 Depends upon the model:
• 1226BL-22XX and 1226BL-41XX: Pump contactor driver
• 1226BL-61XX: Main contactor driver
J3-12 Electromagnetic brake (EM) driver
J3-13 I/O ground
J3-14 Emergency reverse normally open (NO) switch
J3-15 Charger inhibit
Note: 1226BL-61XX models do not support charger inhibit.
J3-16 Pot high/BB check
J3-17 Forward switch
J3-18 Mode switch
I/O Ground Specications
e following table describes the considerations for the I/O ground pins (J1-5, J2-2, and J3-13).
Note: e I/O ground pins are not protected against shorts to B+.
Specification Value
Maximum Current 500mA
Maximum Voltage N/A
Maximum Reverse Voltage 0V
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
