Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 10 van 124
1 — OVERVIEW
Curtis Model 1226BL – July 2024 Return to TOC
pg. 2
• Hydraulic li lockout function protects the vehicle’s batteries from damaging levels of discharge.
• Dynamic pot fault detection (open/short wiring fault detection).
• Electromagnetic brake driver.
• Hydraulic pump contactor driver.
• Main contactor driver (72V model).
• Embedded main relay (24V and 36/48V models).
• Supports a motor temperature sensor.
• Inputs are protected against shorts to B+ and B–.
• Short-circuit protected outputs.
Flexible I/Os
I/Os can be congured to provide up to:
• Two analog/digital inputs.
• One potentiometer input.
• ree 1.5A coil drivers.
• One motor temperature sensor input.
• +5V and +14V external power supplies (120mA total).
Valuable Additional Features
• CANbus option that complies with CANopen DS 301.
• Two programmable speed modes.
• Battery discharge indicator (BDI) output (0–5V).
• Adjustable brake holding voltage reduces heating of the brake coil.
• Integrated status LEDs.
• Charger inhibit input prevents driving while the charger is connected (24V and 36V/48V models).
• Precharge function reduces arcing that would otherwise occur when the main relay or
contactor is closed with the internal capacitor bank discharged.
• 120° Hall position sensors.
Complies with Relevant US and International Regulations
For details on regulatory compliance, see Specications.
Note: Regulatory compliance of the complete vehicle system with the controller installed is the
responsibility of the vehicle OEM.
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
