Curtis 1220 handleiding
Handleiding
Je bekijkt pagina 6 van 50
2
Curtis 1220 Manual, Rev. C
Advanced Motor Control
3 Absolute position control mode.
3 16 kHz PWM switching frequency ensures silent operation.
3 Advanced PWM techniques produce low motor harmonics,
low torque ripple, and minimized heating losses, resulting
in high eciency.
3
Congurable homing methods, center oset, and end-stop
protection.
3 24 V, 40 A 2-minute current rating.
3 24 V nominal supply voltage.
Maximum Safety
3 Dual steering command inputs and dual analog position
inputs for redundant check.
3
Fault output can be used to turn o traction controller’s
main contactor or interlock connection.
3 Steered wheel position (angle) output can be used to limit
the traction motor speed.
3 Following error check ensures the wheel position tracks
the steering command.
3 Power On Self-Test: FLASH, ALU, EEPROM, software
watchdog, RAM, etc.
3
Power On Hardware Check: Motor Open, Motor Short,
and MOSFET short.
3 Periodic Self-Tests: EEPROM parameters, Motor Open,
and command and feedback devices.
Unmatched Flexibility
3 Integrated hourmeter and diagnostic log functions.
3 Curtis 840 Spyglass can be connected to show traction
and steering information such as BDI, hour meter, fault,
traction speed, and steered wheel angle.
3
+5V low-power supply for input sensors, etc.
3 Curtis 1313 handheld programmer and 1314 PC
Programming Station provide easy programming and
powerful system diagnostic and monitoring capabilities.
3
External Status LED driver gives instant diagnostic
indication.
1 — OVERVIEW
Bekijk gratis de handleiding van Curtis 1220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6445 MB |
